The UTG-2675 ultrasonic thickness gauge is a simple to use, highly accurate, hand-held Ultrasonic Thickness Gauge with the ability to measure ultra-thin materials in super high resolution
“The UTG-2675 ultrasonic thickness gauge” is a simple to use, highly accurate, hand-held Ultrasonic Thickness Gauge with the ability to measure ultra-thin materials in super high resolution. Utilizing it‘s state of the art microprocessor and ultrasonic technology the UTG-2675 Ultrasonic Thickness Gauge offers you many outstanding features such as quick scan and extended memory. It features reliable and stable readings, standard or dual element measuring modes, convenient data display (in both millimeters and inches),high resolution .0001″ (0.001mm), ease of operation, low power consumption(two AA batteries). These features make the UTG-2675 ultrasonic thickness gauge unequalled in its performance as well as its value!.
|2.4QVGA(320×240)true color OLED screen, contrast 10000:1
|Adopts delay line probe ultrasonic measuring principle
|0.2mm to 25.4mm(0.007874″ to 1.00″)
|Selectable 0.001mm, 0.01mm or 0.1mm (selectable 0.0001, 0.001″, 0.01″)
|Inch or Millimeter
|Normal, Minimum / Maximum capture, DIFF/RR%, A-Scan, B-Scan
|Selectable 4Hz, 8Hz, 16Hz per second
|Material Velocity Range
|Chinese, English, French, Germany, Japanese
|Minimum and Maximum alarms. Dynamic waveform color change on alarm
|2 AA size batteries
|Selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
|-10ºC to +50ºC (+10ºF to +120ºF); -20ºC for special requirements
|153mm × 76mm × 37mm(H ×W ×D)
|280g including batteries
|Sound velocity (m/s)
UTG-2675 Ultrasonic Thickness Gauge comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.
The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001″.
Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested.
A broad variety of piezoelectric transducers, operating at given frequencies are utilized to generate sound when excited. Typically, a 5mhz frequency is standard on all Phase II Ultrasonic Thickness Gauges. Optional transducers are always available for a myriad of applications.
The direct contact method of pulse/echo type ultrasonic thickness gauges requires use of a couplant. Propylene Glycol is common, but many other substances can be used.
Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC’s, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications.