Load Cell driven system provides precise control of test force
application
Direct digital reading
Engineered to obtain highly sensitive and accurate readings
Perfect for laboratories, workshops, tool rooms, inspection labs,
etc.
Measuring Range: 8-650HBW
Brinell Hardness Tester Specifications:
Innovative closed-loop technology. The Brinell hardness tester incorporates
the latest load cell technology. The test load is applied via a closed-loop
control unit with a load cell, a DC motor and an electronic measurement and
control unit. The result is highly accurate Brinell hardness measurements
at all test loads up to 0.5%. The common load overshoot or undershoot as
known from traditional dead weight, or open-loop, systems is eliminated.
The absence of mechanical weights not only eliminates friction problems but
also makes the equipment less sensitive to misalignments caused by vibrations.
The whole weight of the Brinell Hardness tester is 50% less than the traditional dead weights
type tester.
Test load selection by keyboard and LCD screen.
Fully automatic test cycles. The Brinell hardness Tester features a fully
automatic test cycle, load application, holding, unloading, is performed
fully automatically. This greatly improves reproducibility of test results
since operator influence is eliminated.
Selectable dwell times by screen. The indenter, load, and other test information
are shown clearly on the large LCD screen.
The directions for 0.102F/D2 ratios selecting according to the materials
and hardness range can be showing on the screen.
Equipped with a 20X optical microscope to measure the diameter of Brinell
indention.
Brinell Hardness Calculator (BHC) make the Brinell hardness value calculation easier
and convenient.
