Phase2Plus

Features: Model No. 900-440 TWIN Rockwell/Superficial Rockwell Hardness Tester

This digital Rockwell hardness tester with fully automated load/unload procedures affords highly sensitive and accurate readings. Micro computer controlled Touch Screen with USB output to flash drive. The 900-440 digital Rockwell hardness tester offers programmable scale conversions, dwell times, statistical capabilities and test counter.

Capable of testing in all of the regular Rockwell and Superficial Rockwell hardness scales.

Direct Loading Method With Load-Cell Instead Of Dead Weight System. High Speed Test Cycle and Extremely Accurate Loading Control

• Automatic conversions to HB, HV, Popular Rockwell Scales
• Touch Screen selectable system
• Upper/Lower Limit Settings

• Test resolution: 0.01HR Rockwell unit;
• Operation temperature: 50° - 95°F (10ᵒC～35ᵒC)
• Ambient environment: clean, no vibration, no strong magnetic field, and no corrosive medium;
• Power supply: single phase, AC, 110-220 with manual change, 50～60Hz, 4A;

Minor Load	3kgf / 10 Kgf
Major Load	60 Kgf, 100 Kgf, 150 KGF, 15KGF, 30KGF, 45KGF
Test Force Application	Load Cell Closed Loop
Test Force Control	Motorized
Results Display	Hi Def LCD Digital Readout
Resolution	0.1HR
Vertical Capacity	8.0”
Throat Depth	7.8”
Height	22”
Width	8”
Depth	31”
Weight	175 lbs

Accessories: Included

C-scale Diamond Indenter
• 1/16” Ball Indenter
• 2- HRC test Blocks
• 1- HRB Test Block
• 1-HRN Test Block
• Test Table 5.87” (150mm)
• Flat Anvil 2.5” (63mm)
• Sli. V- Anvil
• Dust Cover
• Accessory Case

Scale Symbol	Indentor Type	Preliminary Force N (kgf)	Total Force N(kgf)	Typical Applications
A	Spheroconical Diamond	98.07 (10)	588.4 (60)	Cemented carbides, thin steel, and shallow case hardened steel
B	1/16” Carbide Ball	98.07 (10)	980.7 (100)	Copper alloys, soft steels, aluminum alloys, malleable iron, etc.
C	Spheroconical Diamond	98.07 (10)	1471 (150)	Steel, hard cast irons, pearlitic malleable iron, titanium, deep case hardened steel, other harder than HRB 100
D	Spheroconical Diamond	98.07 (10)	980.7 (100)	Thin steel and medium case hardened steel, and pearlitic malleable iron
E	1/8” Carbide Ball	98.07 (10)	980.7 (100)	Cast Iron, Aluminum and magnesium alloys, and bearing metals
F	1/16” Carbide Ball	98.07 (10)	588.4 (60)	Annealed copper alloys and thin soft sheet metals
G	1/16” Carbide Ball	98.07 (10)	1471 (150)	Malleable irons, copper-nickel-zinc and cupro-nickel alloys
H	1/8” Carbide Ball	98.07 (10)	588.4 (60)	Aluminum, zinc and lead
K	1/8” Carbide Ball	98.07 (10)	1471 (150)