Ultrasonic Thickness Gauge/Steel Thickness Gauge/Wall Thickness Gauge/Pipe Thickness Gauge

Model No. UTG-2800

Features

Our most popular ultrasonic thickness gauge is loaded with features such as scan, Min/Max setting and USB Output and includes 5Mhz dual sensor probe, couplant gel, software and rugged carry case

State of the art, digital ultrasonic thickness gauge is packed with features typically found on high end models only. This multi-functional ultrasonic thickness gauge offers everything from basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities. This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2800 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.

UTG-2800 ultrasonic thickness gauge comes complete with Base Instrument, 5MHz Dual Sensor Straight Probe, 2oz Bottle of couplant gel, Data Output Software, USB Cable, Certificate of Calibration, Operation Manual and Custom Carry Case.

Specifications:

Model No. UTG-2800
Display type 4-digit LCD w/Back Light
Minimum display unit 0.001″/0.01mm (selectable)
Measuring Range starts from 0.040″ to 12″ in steel w/standard probe
Accuracy +/- (0.5% thickness + .001″)
Sound velocity range 3280-32805 ft/s (1000-9999m/s)
Operating temperature 32-122 degrees F
Frequency 5MHz
Update range 4Hz
Memory 20 Groups (100 files/group)
Output USB
Power supply 3v AA alkaline batteries (2pc)
Battery life Approx. 100 hours (w/backlight off)
Power consumption Working current is less than 3V
Dimensions 5.90″ x 2.91″ x 1.30″ (150 x 74 x 33mm)
Weight 8.6oz (245g)

Table of basic sound velocity of various materials:

Material Sound velocity (m/s)
Aluminum 6260
Iron 5900
Copper 4700
Brass 4640
Zinc 4170
Silver 3600
Gold 3240
Tin 3230
Glass 2350

The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001″.

Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested.

A broad variety of piezoelectric transducers, operating at given frequencies are utilized to generate sound when excited. Typically, a 5mhz frequency is standard on all Phase II Ultrasonic Thickness Gauges. Optional transducers are always available for a myriad of applications.

The direct contact method of pulse/echo type ultrasonic thickness gauges requires use of a couplant. Propylene Glycol is common, but many other substances can be used.

Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC’s, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications.