| |
Sample Evaluation Report:
| Report No: 0109061 |
Test Date: 1/09/06 |
| Sample Material: Poly- mix |
Surface Finish: Smooth |
| Customer Part#: n/a |
Test Method:Ultrasonic |
| Company Name: Moulders Mfg. |
Inspector: N. Gitter |
Results were achieved after multiple test groupings were performed on supplied samples. Results shown in Inch. Sound Velocity Set: 0.082 in/ms
Model No. UTG-2020
Ultrasonic Thickness Gauge
| Section |
Test #1 |
Test #2 |
Test #3 |
Average-Thickness (in) |
| 1 |
0.265” |
0.266” |
0.265” |
0.265” |
| 2 |
0.265” |
0.264” |
0.265” |
0.265” |
| 3 |
0.265” |
0.265” |
0.265” |
0.265” |
| 4 |
0.265” |
0.266” |
0.265” |
0.266” |
| 5 |
0.265” |
0.265” |
0.266” |
0.265” |
| 6 |
X |
X |
X |
X |
| 7 |
X |
X |
X |
X |
| 8 |
X |
X |
X |
X |
| 9 |
X |
X |
X |
X |
| 10 |
X |
X |
X |
X |
| This evaluation process is only intended to inform the prospective user of the capabilities and performance of above mentioned testing equipment on supplied test samples in a controlled environment. Results may vary based upon factual application, environment and product knowledge. |
|
| |
| |
|
|
| |
|
|
