| |
Sample Evaluation Report:
| Report No: 0112061 |
Test Date: 1/12/06 |
| Sample Material: 1018 Steel |
Surface Finish: Machined |
| Customer Part#: n/a |
Test Method: Dynamic Hardness Testing |
| Company Name: AAA Mfg. |
Inspector: N. Gitter |
Results were achieved after multiple test groupings were performed on supplied samples. Leeb method converted to HRC scale
Model No. PHT-2500D
Portable Hardness Tester
| Section |
Test #1 |
Test #2 |
Test #3 |
Average-HRC |
| 1 |
46.6 |
46.9 |
46.5 |
46.7 |
| 2 |
45.8 |
46.2 |
46.2 |
46.1 |
| 3 |
46.5 |
46.5 |
46.8 |
46.6 |
| 4 |
46.8 |
46.5 |
46.5 |
46.6 |
| 5 |
46.5 |
46.5 |
46.0 |
46.3 |
| 6 |
46.2 |
46.5 |
46.5 |
46.4 |
| 7 |
46.5 |
46.0 |
46.0 |
46.1 |
| 8 |
45.8 |
46.5 |
46.5 |
46.2 |
| 9 |
46.2 |
46.8 |
46.5 |
46.5 |
| 10 |
46.2 |
45.9 |
46.2 |
46.1 |
| This evaluation process is only intended to inform the prospective user of the capabilities and performance of above mentioned testing equipment on supplied test samples in a controlled environment. Results may vary based upon factual application, environment and product knowledge. |
|
|
|
| |
|
|
