Metrology Material, Precision Measuring, Hardness Testers Phase II Plus Register
for
Free Catalog
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353

 
 
Portable Hardness Tester (General Purpose)
   
The PHASE II Hardness Hester, Model # PHT-1300 is an advanced integrated Hardness Tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the Hardness of all metals and widely applied in many areas of industry.

The PHT-1300 Hardness Tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwell and Shore hardness values. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of model # PHT-1300 is defined as "the quotient of the impact body s rebound velocity over its impact velocity". When the tester is connected to its optional printer, it can perform real time or batch printing. Other optional accessories include various support rings to meet the requirements of specialized applications.
 
portable hardness tester integrated
TECHNICAL SPECIFICATIONS

DIMENSIONS 6.1 x 2.1 x 0.9in (150 x 22 x 53mm)
IMPACT DEVICE D
IMPACT ENERGY 8 ft-lbs (11Nmm)
TEST TIP TUNGSTEN CARBIDE
MEASURING ACCURACY +- 0.8% (CORRESPONDING TO +- 1 HRC AT HRC=58)
MAX. HARDNESS OF SAMPLE 980HV
WEIGHT 0.4lb (130g)
OPERATING TIME 8 HOURS CONTINUOUS /RECHARGEABLE
IMPACT DIRECTION ANY ANGLE
OPERATING TEMPERATURE 32 to 122 DEGREES F (0 to 50 DEGREES C.)
MIN. WEIGHT OF SAMPLE 11lbs / 5kg
(LESS THAN 5kg TO 0.1kg COUPLED ON SOLID SUPPORT)
MIN. THICKNESS OF SAMPLE 0.2in (5mm) (COUPLED: 3mm)
MIN. THICKNESS OF LAYERS 0.8mm
MIN. RADIUS OF CURVED SURFACE 1.2in (30mm) (WITH SUPPORT RINGS: 11mm)


MATERIALS AND HARDNESS TESTING RANGE PHT-1300 (HL:200-900)


MATERIAL HRC HRB HRA HB HV HS
STEEL & CAST STEEL 20-68 60-100 59-86 93-674 83-976 32-100
COLD TOOL STEEL 20-67       80-898  
STAINLESS STEEL 20-62 46-100   85-655 85-802  
GREY CAST IRON       93-334    
NODULAR CAST IRON       131-387    
CAST ALUMINUM ALLOYS       27-159    
COPPER/ZINC ALLOYS (BRASS)   13-95   40-173    
CuAI/CuSn ALLOYS(BRONZE)       60-290    
WRAUGHT COPPER ALLOYS       45-315    


SUPPORT RINGS

On curved surfaces having a radius of under 30mm, effective positioning on the workpiece is facilitated by the use of support rings (set of 12). The appropriate ring is screwed on to the end of the impact device in place of the standard flat support ring. The set includes support rings suitable for bar/tube and grooves up to a radius of 11mm.

THE PHASE II HARDNESS TESTER MODEL# PHT-1300 COMES COMPLETE WITH A TEST BLOCK, PLASTIC FITTED CASE, BATTERY CHARGER AND COMPLETE OPERATIONS MANUAL.

Related Products
  1. For a universal, multi application Portable Hardness Tester with built-in printer, click on the Phase II PHT-1100.
  2. For testing on Case Hardened Layers, click on the Phase II model PHT-1320.
  3. For testing on small or difficult to reach spots, click on the Phase II model PHT-1340.
  4. For Hardness testing of Rubber & Plastics, click on Phase II model PHT-900.
  5. For the latest in technology and software. A universal, multi-application Phase II Portable Hardness Tester, model PHT-2500.
 
Back to Product Listing
   

Serial #:
Note: Enter a valid Serial number to view manuals/additional information about this product.
Hardness Testers
Ultrasonic Thickness Gauges      Surface Roughness
Coating Thickness      Force Gauges
Vibration Meters      Optical Instruments
  Phase II Plus
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353
Click here for a free catalog