Metrology Material, Precision Measuring, Hardness Testers Phase II Plus Register
for
Free Catalog
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353

 
 
Coating Thickness Gages
   
The NEW standard in Coating Thickness Testing!

Smallest Probe in the world! IP52 Waterproof! Infrared RS 232 output!


The PHASE II PTG-2500 Coating Thickness Gage can perform two different methods of calculating Coating Thickness measurement by utilizing the characteristics of both eddy current and magnetic induction. Testing performance is both non-destructive and extremely accurate.

With this state of the art Coating Thickness gage, you can easily detect the thickness of nonmagnetic Coating on a magnetic substrate (ferrous) or an insulating Coating on a non-magnetic conductive substrate (non-ferrous) without having to change probes or make software adjustments.
 
coating thickness gages ferrous non ferrous fn
2 versions available!
BASIC: Standard gage (no memory/output) Model #: PTG-2500B
TOP LINE: Standard gage with extensive memory function and RS232 output via Infrared. Model #: PTG-2500

The PHASE II PTG-2500 Coating Thickness Gage can be used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.


Main Technical Data
  • Measuring range: 0-1500 m m max. or 0-60 mils
  • Resolution: 0.1m m / 0.01mils or < 2% of measured value
  • Guaranteed tolerance:
  • With works-calibration: +/- 3m m / 0.12 mils or 3% of value. Whichever is greater After one-point calibration: +/- 1m m / 0.04 mils or 2% of value. After two- point calibration: +/- 1m m / 0.04 mils or 2% of value.
  • Display: Alphanumerical with 4 digits (digit height = 10mm/0.4")
  • Language selection: English, German, French
  • Min. measuring area: 0.2" x 0.2" (5mm x 5mm)
  • Min. radius of curvature: Convex: 0.12" (3mm)

  • Concave: 1.2" (30mm)
  • Min. substrate thickness: Ferrous: 20 mils (0.5mm)

  • Non-ferrous: 2 mils (50 m m)
  • Memory: Max of 80 values can be recalled individually
  • Calibration: Factory calibration

  • Zero Calibration
    Foil calibration
  • Statistics: N, x, s or N, Max, Min over max. 9.999 readings
  • Limit values: adjustable with acoustics
  • Interface: Infrared, IrDA standard
  • Surface temperature of test object: 302 degrees F

  • (contact time max is 2 seconds)
  • Power source: 2 AAA batteries
  • Dimensions (LxWxH) 4" x 1.9" x 0.96" (99 x 48 x 24mm)
  • Weight: 3oz. (85g)
  • Sensor: Integrated probe Dimension of contact surface: 0.2" dia. (5mm)
  • Protection class: IP52 (dust/waterproof)
PTG-2500 = Standard gage w/ memory and output
PTG-2500B = Standard gage no memory/output

Related Products
  1. For individual gages that test in "either" Ferrous "or" Non-Ferrous substrate environment, please click here for the PTG-2200-2300.
  2. For a Coating Thickness Gage that can test on both Ferrous and non-Ferrous substrate with a Built-in Printer, please click here for the PTG-1000.
 
Back to Product Listing
   
Hardness Testers
Ultrasonic Thickness Gauges      Surface Roughness
Coating Thickness      Force Gauges
Vibration Meters      Optical Instruments
  Phase II Plus
21 Industrial Ave.
Upper Saddle River, NJ 07458
Phone: 201-962-7373
Toll Free: 800-526-9087
Fax: 201-962-8353
Click here for a free catalog