| |
| Coating Thickness Gauge |
| |
|
Simplicity in coating thickness measurement!
The PHASE II PTG-3200 can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.
Testing performance is both non-destructive and extremely accurate.
With this state of the art thickness gage, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) with only a simple change of the probe.
The PHASE II PTG-3200 can be used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.
|
|
| |
|
|
Main Technical Data
. Measuring range: 0-2000 µ m max. or 0-80 mils
. Resolution: 0.1µ m / 0.01mils(0-99µ m) or 1µ m (over 100µ m)
. Guaranteed tolerance:
After one-point calibration: +/- 1-3%n or 2µ m (whichever is greater)
. Display: 4 digits (digit height = 10mm/0.4")
. Min. measuring area: 0.2" x 0.2" (5mm x 5mm)
. Min. radius of curvature: Convex: 0.12" (3mm)
Concave: 1.2" (30mm)
. Min. substrate thickness: Ferrous: 20 mils (0.5mm)
Non-ferrous: 2 mils (50 µ m)
. Calibration: Zero Calibration
Foil calibration
. Surface temperature of test object: 302 degrees F
(contact time max is 2 seconds)
. Power source: 4 AA batteries
. Dimensions: 161 x 69 x 32mm
. Weight: 9oz. (260g)
The PTG-3200 comes complete with 1pc Ferrous probe, 1pc Non-Ferrous probe, 2 substrate samples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.
|
| |
| Back
to Product Listing |
| |
|
|
|
|
|
