| |
| Integrated Portable Coating Thickness Gauges |
| |
|
PTG-2200
The Phase II brand PTG-2200 is an integrated portable Coating Thickness tester that combines the ferrous F-probe and a data processor in a robust single unit. It automatically computes the thickness of non-magnetic coatings (such as paint, plastic, galvanized layers) on a ferrous substrate by utilizing the properties of magnetic induction. Both continuous and single measurement modes are available.
PTG-2300
The Phase II brand PTG-2300 is an integrated portable Coating Thickness tester that combines the non-ferrous N-probe and a data processor in a robust single unit. It automatically computes the thickness of insulating coatings (such as paint, plastic) on a non-ferrous substrate by utilizing the properties of eddy current. Both continuous and single measurement modes are available. |
|
| |
|
|
The PTG-2200/PTG-2300 coating thickness gauge are characterized by its very compact size, high accuracy, wide measuring range and simplicity of operation.
The PTG-2200/PTG-2300 coating thickness gauge automatically displays statistical data such as minimum, maximum and mean values, and the standard deviation. When the gauge is connected to its optional printer (model MP-2100), it can perform real time or batch printing.
Technical specifications:
| Principle |
PTG-2200 - magnetic
induction
PTG-2300 - eddy current |
| Measuring range |
0-1250 microns |
| Resolution |
1 micron |
Accuracy (H = nominal value)
Zero-point calibration
Two point calibration |
+- (3%H+1 m m ) micron
+- (1% - 3%H+1 mm) micron |
Sample:
Min. radius work-piece
Min. measuring area
Min. sample thickness |
Convex 1.5 / concave 9mm
0.3in (7mm diameter)
0.01in (0.5mm) |
| Operating temperature |
32-104 degrees F (0-45 degrees C) |
| Power supply |
NiMH 2x3.6v |
| Dimensions |
5.9 x 2.2 x 0.9in (150 x 53 x 22mm) |
| Weight |
0.3lbs (120g) |
| Operating humidity |
20% - 70% |
- One or two points calibration
- Statistics: average (mean), maximum (max), minimum (min), number of measurements (no), standard deviation (s.dev).
- Real time printing or batch printing on model# MP-2100
- Continuous measurement (continue) and single measurement (single)
- Automatic switch off
The PTG2200/PTG2300 comes complete with a calibration set, charger and a protective case.
Related Products
- For a combination Ferrous and non-Ferrous environment, please click here for the PTG-2500.
|
| |
| Back
to Product Listing |
| |
|
|
|
|
|
